Garmin eTrex Legend Cx - Manual (Page 49)

eTrex Venture Cx and Legend Cx Owner’s Manual 39
M
AIN
P
AGES
> M
AP
P
AGE
Map Page
The eTrex comes with a built-in basemap that
includes a database of cities, interstates, state and
county highways, exit information, and lake and river
outlines. The standard basemap can be enhanced
using MapSource data.
Two map operating modes, position mode and pan mode,
determine what cartography is shown on the map.
Position mode pans the map to keep your present
location in the display area. The position marker
shows your travel on the Map Page.
When you press the Rocker, the eTrex enters pan
mode, which moves the map to keep the white arrow
(map pointer) within the display area. When you
are in pan mode, you can move the map pointer about
the page to highlight and identify map items. If there
is more than one map item under the pointer, a list of
all the items appears at that point.
You can add and configure up to four optional data
fields to the top of the page to provide a variety of
travel and navigational information.
To show data fields on the Map Page:
1. Press the Menu key to open the Map Page
Options Menu.
2. Highlight Data Field, and press Enter. The
Show sub-menu appears.
3. Select the number of data fields you want to
show on the Map Page, and press Enter.
Data fields
Show sub-
menu
Map Page with
data fields