Using fm traffic, Led blink codes – Garmin nuvi 800 User Manual

Page 45

Advertising
background image

nüvi 800 Series Owner’s Manual



Using FM Traffic

Using FM Traffic

The traffic receiver is included in some

nüvi packages.
Use an FM TMC (Traffic Message

Channel) traffic receiver to receive

traffic information that is broadcast

over the FM Radio Data System. For

information about FM traffic receivers

and coverage areas, see

www.garmin

.com/traffic

.

nOTe: Garmin is not responsible for

the accuracy of the traffic information.

The FM traffic receiver receives

signals from the traffic service

provider and displays that information

on your nüvi.

nOTe: The FM traffic receiver and

the nüvi must be in data range of an

FM station transmitting TMC data to

receive traffic information.

To power connector

on nüvi cradle

To power outlet

in vehicle

Power

LED

Status

LED

nOTe: If your FM TMC traffic

receiver has an antenna with suction

cups on it, route the antenna on your

windshield vertically using the suction

cups.

LED Blink Codes

The green Power LED lights when

connected to external power. The Status

LED indicates the signal reception:

Yellow dot-dash flashes

determining which country you are

currently in.
Yellow solid—searching for signal.
red solid—momentary sync loss.
Green solid—normal traffic data.



Advertising
This manual is related to the following products: