Lexmark E260dn - Manual (Page 108)

Load manual feeder with <custom type name>
Try one or more of the following:
• Load the manual feeder with the correct paper type and size.
• Press to continue printing.
The printer manually overrides the request, and then paper prints from an automatically selected tray.
• Cancel the current job.
Load manual feeder with <custom string>
Try one or more of the following:
• Load the manual feeder with the correct paper type and size.
• Press to continue printing.
The printer manually overrides the request, and then paper prints from an automatically selected tray.
• Cancel the current job.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
31 Defective cartridge
The toner cartridge is not functioning properly.
Try one or more of the following:
• Remove the toner cartridge, and then reinstall it.
• Remove the toner cartridge, and then install a new one.
32.yy Replace unsupported cartridge
Remove the toner cartridge, and then install a supported one.
58 Too many flash options installed
Try one or more of the following:
• Turn the printer off, and then remove extra flash options:
1 Turn the printer off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly grounded outlet.
5 Turn the printer back on.
• Press to clear the message and continue printing.
Troubleshooting
108