Programmable rain off, System off, Automatic watering – Hunter X-CORE User Manual

Page 22: Setting event day(s) off, Programming the controller

Advertising
background image

20

proGrammING THE CoNTrollEr

setting Event Day(s) off

The X-Core allows you to program a No Water Day(s). This feature

is useful to inhibit watering on specific day(s). For example, if you

always mow the lawn on Saturdays, you would designate Saturday

as a no Water Day so that you are not mowing wet grass.
1. Turn the dial to the WAteR DAys position.
2. Enter an interval watering schedule as described on page 19.
3. Press the

button to scroll to the no Water Days at the bottom

of the display. MO will be flashing.

4. Use the

button until the cursor is at the day of the week you

wish to set as a No Water Day.

5. Press the

button to set this day as a no water day. The will

illuminate over this day.

6. Repeat steps 4 and 5 until all desired event day(s) are off.

NoTE: you also have the option in the interval
watering schedule to program Odd or even days off.

automatic Watering

After programming the X-Core, set the dial to the RUn

position to enable automatic execution of all selected

watering programs and start times.

system off

Valves currently watering will be shut off after

the dial is turned to the systeM OFF position

for two seconds. All active programs are

discontinued and watering is stopped. To return

the controller to normal automatic operation,

simply return the dial to the RUn position.

programmable rain off

This feature permits the user to stop all

programmed waterings for a designated period

from 1 to 7 days. At the end of the programmed

rain off period, the controller will resume normal

automatic operation.
1. Turn the dial to the systeM OFF position.

Wait for OFF to be displayed.

2. Press the

button as many times as

needed to set the number of days off

(up to 7 days).

3. Turn the dial back to the RUN position at

which OFF, a number, the

and

icons

will be displayed.

The days off remaining will decrease at midnight

each day. When it goes to zero, the display will

show normal time of day and normal irrigation

will resume at the next scheduled start time.

RUN

SYSTEM OFF

RUN

SYSTEM OFF

Advertising