Erase a feature button, Feature button prompts – Nortel Networks T7316 User Manual

Page 102

Advertising
background image

102

Chapter 9 Customize your telephone

P0937240 03.1

Erase a feature button

Follow these steps to erase a feature button, and make it blank:

1

Press ≤•⁄.

2

Press the feature button.

3

Press ≥ or OK to erase the button.

Feature button prompts

These prompts can appear when you work with the Feature button codes:

The name of the feature assigned to a button appears on the display
when you press the button.

SHOW

appears when there is more

information available.
Press £ or SHOW

for additional information.

If you are checking a speed dial button, enter the two-digit speed dial
code that you want to check.

Enter the feature code, or press ® or QUIT

to end programming or

CLEAR to clear the numbers entered. The system accepts the entry
when you enter a valid feature code.

Press ≤ and enter the feature code you want to assign to the button.
Check that the code is valid.

You have programmed a button with a feature programmed on another
button. The feature has moved to the button you just programmed. The
original button is now blank.

Press the button you want to check. Press ≤ or

EXIT when finished.

Enter the number you want to program and press ≥. To erase the
button, press ≥.

Enter the number you want to program and press OK. To erase the
button, just press ≥ or

OK

.

For other displays, see

Appendix B, “Common display prompts and error messages,” on page

167

.

<Feature name>

SHOW

OK

Enter code:

F__

QUIT

CLEAR

Feature code:

QUIT

Feature moved

Press a button

EXIT

Program and HOLD

Program and OK

QUIT

OK

Advertising
This manual is related to the following products: