Default button assignments, Rules of default button assignment, T7316 button mapping – Nortel Networks T7316 User Manual

Page 103: T7316 button

Advertising
background image

Chapter 9 Customize your telephone

103

Telephone Features Programming Guide

Default button assignments

During Startup, the installer chooses one of the available templates. Default features are assigned
automatically to the programmable buttons on telephones in the system, and vary with the template
and the telephone. The default features appear in the following tables in this chapter.

Rules of default button assignment

Line and Intercom buttons assigned by default templates can be changed in programming.
Handsfree/Mute and answer button features are not assigned by default. If these features are
defined, however, they are automatically assigned to specific buttons, as described on this and the
following page. Refer to

“T7208/M7208(N) telephone button defaults” on page 105

.

The T7316/M7310(N) and T7208/M7208(N) telephones can have up to eight Intercom buttons.
They appear above the Handsfree button at the bottom right-hand corner on your telephone.

Each telephone can have up to four answer buttons. They appear above Intercom buttons in the
right column and continue up from the bottom in the left column, replacing the features on those
buttons.

External line buttons appear in ascending line order, starting at the top button in the left column
(the top button on the T7208 telephone). If more than eight external lines are assigned to a T7316
telephone, or more than 12 to a M7324(N) telephone, assignment continues down the buttons on
the right column, erasing the feature codes on those buttons. Line buttons have priority over feature
access buttons except for the Handsfree/Intercom, or answer buttons.

T7316 Button mapping

Button mapping for the T7316 telephone is unique because this telephone has more buttons than
the other telephone types. Internal autodial numbers are assigned to buttons, 11, 13, 15, 17, 19, and
21. Programmed external line buttons appear in descending line order starting with button 1. When
more than five external lines are programmed, assignment continues on button 6 and continues in
descending order.

Programmed intercom buttons appear on buttons 9 and 10. When you require more than two
intercom buttons, you can use button 8. When the Handsfree feature is programmed to your
telephone, the feature appears on button 10, moving intercom button(s) up one position.

Note:

No defaults

None of these buttons are available on the T7100, Companion, DECT, or NetVision
telephones, which have no programmable buttons. The NetVision telephones have a
pre-programmed display menu instead of programmed feature buttons. This feature menu
can be changed by the system administrator who set up the telephone.

Advertising
This manual is related to the following products: