Overriding services with a control telephone, Direct-dial telephone ringing service, User passwords – Nortel Networks T7316 User Manual

Page 122: Registration password, Log password

Advertising
background image

122

Chapter 11 System features

P0937240 03.1

Overriding services with a Control telephone

The control telephone can override services turned on and off according to a schedule by entering
a Services feature code, and then by selecting a different schedule. This override remains until
canceled. If you select a schedule with an asterisk (*), the next automatic service schedule comes
into effect at the programmed time.

Direct-dial telephone ringing service

Direct-dial calls to a direct-dial telephone ring at the extra dial telephone when you enter the
Ringing service feature code (≤°‡⁄) at that direct dial telephone. The installer assigns the
extra dial telephone. Note that only the extra dial telephone is activated, not the actual Ringing
service (unless that direct-dial telephone is a control telephone).

User passwords

User passwords prevent unauthorized or accidental changes to your system. There are two types of
user password: Registration and Call Log.

Registration password

(Unified Manager Programming)

The Registration password controls the registration of Companion portables to the Business
Communications Manager system. For more information see the Business Communications
Manager Programming Operations Guide
.

Log password

(Unified Manager Programming)

If a person does not remember their Call Log password, you can clear the previously assigned
password in programming. The person can enter a new password from their telephone.

You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
.

Advertising
This manual is related to the following products: