Chapter 3, Make a call, Chapter 3 make a call – Nortel Networks T7316 User Manual

Page 45

Advertising
background image

45

Telephone Features Programming Guide

Chapter 3
Make a call

This chapter describes the various ways you can make a call from your telephone.

The following are different ways to make a call on a digital or IP telephone, depending on the
programming and the type of call:

Pick up the handset and dial. Business Communications Manager supports three methods of
dialing. See

“Select how you dial your calls” on page 48

.

Pick up the handset, press a line button, and dial (if the call is not on your prime line).

Press ≈ and dial (to talk without using the handset). See

“Handsfree and Mute” on page 113

.

Press a line or intercom button, then press the handsfree button and dial to talk without the
handset. The speaker is active and the microphone is muted until you select the handsfree
button or pick up the handset.

Press a line or intercom button and dial to talk without the handset and if Automatic Handsfree
is programmed on your telephone.

Use one of the features that make dialing easier. See

Chapter 4, “Time-saving features,” on

page 55

.

The following displays show the common messages you can receive when you are handling calls.

The telephone you have called has no internal lines available. Press

LATER

to use the Ring Again or Message features or press PRIORITY

to

make a priority call.

You are dialing using Pre-dial. To erase an incorrect digit, press the left
end of √ or BKSP. When the number is complete, select a line
or lift the handset.

This prompt remains on your display while you are on a call you have
dialed. To transfer the call, press TRANSFR.

Your telephone is connected to the telephone you are trying to call.
Check your active line buttons, and return to that call.

Wait for the telephone to be answered. If no one answers, press LATER
to use the Ring Again feature (

“Ring Again” on page 50

) or Message

feature (

“Messages” on page 87

), or press PRIORITY to make a priority

call.

You cannot use Ring Again on your current call. You can use Ring
Again while you have a busy signal on an internal call or line pool
request or while an internal call is ringing.

The telephone you are calling has Do Not Disturb turned on. Press
LATER to use the Ring Again or Messages features, or press PRIORITY
to make a priority call.

221 busy

PRIORITY

LATER

9__

QUIT

BKSP

95551234

TRANSFR

Already joined

Calling 221

PRIORITY

LATER

Can't ring again

Do not disturb

PRIORITY

LATER

Advertising
This manual is related to the following products: