Use intercom as the line for autodial – Nortel Networks T7316 User Manual

Page 56

Advertising
background image

56

Chapter 4 Time-saving features

P0937240 03.1

Use intercom as the line for Autodial

If you press an intercom button as the line for an external autodial number, you must include a
valid line pool access code or a destination code. If access codes for line pool or destination codes
change, remember to reprogram autodial numbers.

These are some of the prompts you might receive:

Continue to enter digits until the number is complete. Press √
or BKSP to erase an incorrect digit.
Press ≥ or OK when you finish.

The memory allocated to autodial numbers in your system is full.

While programming external Autodial, you erased the button by
pressing ≥ or OK before entering any digits.

Enter the number you want to program, selecting the line first if
necessary, exactly as if you were making a call.

Enter the internal telephone number you want to program.

You are programming an internal autodial button and have entered a
number that is not an internal number on your system. Enter a valid
internal number. If the number you are entering is a destination code,
use external autodial.

Press the memory button you want to program.

Enter the number you want to program on the button, then press ≥.

Enter the number you want to program on the button, then press ≥ or

OK. You can include a line or line pool selection in an autodial sequence

by selecting the line before entering any digits.

The number is correctly stored on the button.

For other displays, see

Appendix B, “Common display prompts and error messages,” on page

167

.

987___

QUIT

BKSPOK

Autodial full

Button erased

Enter digits

QUIT

OK

Intercom #: ___

QUIT

Invalid number

Press a button

QUIT

Program and HOLD

Program and OK

QUIT

OK

Programmed

Advertising
This manual is related to the following products: