User speed dial programming for t7000, Saved number redial, Save a number – Nortel Networks T7316 User Manual

Page 60: Dial a saved number

Advertising
background image

60

Chapter 4 Time-saving features

P0937240 03.1

User Speed Dial programming for T7000

1

Press ≤•›.

2

Enter the speed dial code.

3

Enter the telephone number.

4

Press the ≥ key.

Saved Number Redial

You can save the number of the external call you are on, provided that you dialed the call, so that
you can call it again later. Each telephone can save one number at a time with Saved Number
Redial, but not one number for each line.

Save a number

To save a number, press ≤fl‡ while you are on the call.

Saved Number Redial records a maximum of 24 digits.

Dial a saved number

To dial a saved number, press ≤fl‡ when you are not on a call.

If you have a programmed Saved Number Redial button, you can use Button Inquiry (≤•‚)
to check the last number before you dial it.

The system cannot dial the number stored. Reprogram the number.

For other displays, see

Appendix B, “Common display prompts and error messages,” on page

167

.

Note:

NetVision has set-based speed dialing capability. For detailed instructions about

how to set this up, refer to your NetVision handset user documentation.

Note:

You can copy a number on an autodial button using Saved Number Redial.

Unknown number

Advertising
This manual is related to the following products: