Call foward prompts, Programming call forward – Nortel Networks T7316 User Manual

Page 78

Advertising
background image

78

Chapter 6 Forward your calls

P0937240 03.1

Call Foward prompts

These are the prompts you can encounter when using Call Forward.

Programming Call Forward

(Unified Manager Programming)

There are a number of variables that influence how Call Forward works on the system. To set them,
you need to start a Unified Manager session. For more information about programming using
Unified Manager, see the Business Communications Manager Programming Operations Guide.

External call foward: To allow external destination programming you need to set the Allow
Redirect to yes.

Call Forward no answer: redirects calls to another telephone in your system or to the voice mail
system.

Forward no answer delay: Determines the number of times that an incoming call rings at your
telephone before the system forwards the call. To estimate the delay time in seconds, multiply the
number of rings by six.

Call Forward on busy: redirects calls to another telephone on your system or to a voice mail
system when you are busy on a call, or when you have Do Not Disturb activated at your telephone.
Telephones that have Call Forward on busy active can receive priority calls. If you are busy on a
target line call, another call to that target line redirects to the prime telephone for that target line or
to the designated voice mail system.

There are several reasons why you can get this message. For example,
you cannot forward your calls to a telephone that has Call Forward
programmed to your telephone.

Your calls are being forwarded to telephone 221.

Two or more telephones are linked in a forwarding chain, and one is out
of service or used for programming.

For other displays, see

Appendix B, “Common display prompts and error messages,” on page

167

.

Note:

Line Redirection takes priority over Call Forward no answer.

Note:

Line Redirection takes priority over Call Forward on busy. The Call Forward

feature or Call Forward programming do not affect calls redirected by Line Redirection.

Forward denied

Forward>221

CANCL
Not in service

Advertising
This manual is related to the following products: