Turn on line redirection, Allowing a telephone to redirect lines, Turning the redirect ring on or off – Nortel Networks T7316 User Manual

Page 80

Advertising
background image

80

Chapter 6 Forward your calls

P0937240 03.1

Allowing a telephone to redirect lines

(Unified Manager Programming)

Your system administrator can determine if a telephone is allowed to redirect calls.

You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
.

Turning the redirect ring on or off

(Unified Manager Programming)

You can program a telephone to ring briefly (200 milliseconds) when you redirect a call on one of
its lines.

You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide

How Line Redirection is different from Call Forward

Call Forward forwards all calls that arrive at a selected telephone to an internal or external
telephone. Line Redirection redirects only the lines you define, no matter which telephones they
appear on, to a telephone outside the system.

Line Redirection takes priority over the Call Forward feature.

If both features are active on a telephone:

Incoming external calls on redirected (trunk) lines route to the indicated Selective Line
Redirection (SLR) external destination.

Incoming internal calls go forward to the indicated Call Forward destination.

Turn on Line Redirection

To turn on Line Redirection:

1

Press ≤°›.

2

Select the outgoing line to use for redirected calls.

3

Enter the number you need to redirect call to.

Note:

If a telephone has redirect ring enabled, it rings briefly for redirected calls on one of

its lines when another telephone has set up the line redirection.

Advertising
This manual is related to the following products: