Page shortcuts, Allowing access to the page feature, Creating page zones – Nortel Networks T7316 User Manual

Page 86

Advertising
background image

86

Chapter 7 Communicating in the office

P0937240 03.1

Page Shortcuts

Instead of entering the Page feature code followed by the page type, you can enter the following
shortcut codes.

Allowing access to the Page feature

(Unified Manager Programming)

The system administrator can allow or disallow access to the Page feature for each telephone. This
means the user of a telephone where Page has been disallowed, cannot initiate a page. A telephone
that has Page disallowed cannot be entered into a Page Zone to receive a page, however, external
pages will be broadcast wherever the external speakers are mounted.

You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
.

Creating page zones

(Unified Manager Programming)

A zone is any group of telephones that you want to group together for paging, regardless of their
location. You can assign one of six zones to each telephone. The maximum number of telephones
in a page zone is 50.

You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
.

You can make a telephone part of a page zone when the telephone has Page assigned as Y

(Yes).

Your installer programs the following options:

a tone sounds before a page announcement begins

the maximum number of seconds a page announcement can last before it automatically times
out

All

≤fl‚

Internal

≤fl⁄ + zone (0 to 6)

External

≤fl¤

Combined

≤fl‹ + zone (0 to 6)

Note:

If a telephone has redirect ring enabled, it rings briefly for redirected calls on one of

its lines when another telephone has set up the line redirection.

Advertising
This manual is related to the following products: