Voice call, Make a voice call, Mute voice call tones – Nortel Networks T7316 User Manual

Page 91: Answer a voice call using handsfree answerback

Advertising
background image

Chapter 7 Communicating in the office

91

Telephone Features Programming Guide

Voice Call

You can make an announcement or begin a conversation through the speaker of another telephone
in the system.

Make a Voice Call

To make a Voice Call:

1

Press ≤flfl.

2

Follow the instructions on the display.

Mute Voice Call tones

When a voice call begins at your telephone, you hear a beep every 15 seconds as a reminder that
the microphone is on. To stop the beep, pick up the handset or press the handsfree button.

Answer a Voice Call using Handsfree Answerback

With Handsfree Answerback assigned to your telephone, you can respond to a voice call without
touching the telephone.

When a person makes a voice call to you, just start talking. The microphone on the telephone picks
up your voice.

After you have answered a voice call, you can put the call on hold, transfer it, or treat the call as a
normal call.

Handsfree Answerback is not available to the T7100 telephone or the portable telephones.

You are at the beginning of your list of messages. Press NEXT to move
through your messages.

You are trying to send a message to a user whose message waiting list is
full.

You tried to send a message but your list of sent messages is full.
Cancel one of the messages you sent, if possible, or wait until you have
received a reply to one of those messages.

For other displays, see

Appendix B, “Common display prompts and error messages,” on page

167

.

Note:

Voice calls made to portable handsets that do not have speakers, such as

Companion, the T7406 cordless handset, and NetVision telephones, will receive the call as
a ringing call.

Start of list

NEXT

Their list full

Your list full

Advertising
This manual is related to the following products: