Pentax K-X - Manual (Page 74)

72
B
asi
c Op
er
ati
o
n
s
3
You can change the flash output in a range of –2.0 to +1.0. The following
flash compensation values can be set according to the step interval set in
[1. EV Steps] (p.108) of the [A Custom Setting 1] menu.
Compensating Flash Output
Step Interval Flash Compensation Value
1/3 EV –2.0, –1.7, –1.3, –1.0, –0.7, –0.3, 0.0, +0.3, +0.7, +1.0
1/2 EV –2.0, –1.5, –1.0, –0.5, 0.0, +0.5, +1.0
Daylight-Sync Shooting
In daylight conditions, the flash will eliminate shadows when a portrait
picture is taken with a person’s face cast in shadow. Use of the flash
in this way is called Daylight-Sync Shooting. The b (Manual Flash
Discharge) mode is used when shooting with Daylight-Sync
Shooting.
Taking pictures
1 Pop up the built-in flash manually and confirm that the flash
mode is set to E. (p.70)
2 Confirm that the flash is fully charged.
3 Take a picture.
Without Daylight-Sync With Daylight-Sync
The picture may be overexposed if the background is too bright.