Canon B820 - Manual (Page 24)

2-6
Setting the TEL LINE TYPE
Before using your fax, make sure it is set for the telephone line type of your telephone system. If
you are unsure of your telephone line type, check with your local telephone company.
See pp. 2-2, 2-3 for the buttons on the operation panel.
Dialing through a switchboard
(PBX)
A PBX (private branch exchange) is an on-site telephone switchboard.
• If your fax is connected through a switchboard, dial an outside line access number first. Then
dial the rest of the number.
• If you want to dial with automatic dialing, you may have to insert a pause between the outside
line number and the telephone number when you register the number for one-touch or coded
speed dialing.
• When the fax is connected to a PBX or other telephone switching system, you can register the
access type and outside access line number under the [R] button (see p.2-7). Once you have
registered them, you simply need to press [R] before dialing a fax or telephone number.
1 Press [Function].
   
Press [Start/Copy] twice.
2 Use [ ] or [ ] to select TEL LINE TYPE.
   
Press [Start/Copy].
3 Use [ ] or [ ] to select the appropriate line type.
You can also select TOUCH TONE.
   
Press [Start/Copy].
4 Press [Stop].
Setting ends and the fax returns to standby mode.
DATE & TIME
ROTARY PULSE