Blanco 511-661 - Manual

BLANCO
SINK SPECIFICATIONS
SILGRANIT® Platinum Series
BLANCODIAMOND™ PREP SINK Drop-In
Models 511 -660, 511 -661, 511 -662, 511 -663, 511 -664
FEATURED MODEL
511 -660 Biscuit, 8" & 6" bowi depths
ADDITIONAL MODELS
511 -661 White, 8" & 6" bowi depths
511 -662 Antbracite, 8" & 6" bowl depths
511 -663 Metallic Gray, 8" & 6" bowl depths
511 -664 Café Brown, 8" & 6" bowl depths
FEATURES
• Flat sink deck allows for both drop-in and
undermount installation
• 80% rock hard granite
• Color all the way through
• Highly resistant to scratching, staining and all
household acids and alkali solutions
• Non-porous, easy-to-clean
• Heat resistant to 536° F
• Extremely hygienic, does not absorb odors
or bacteria
CODE/STANDARDS COMPLIANCE
ANSI Z124.6-97
lAPMO/UPC listed
OPTIONAL ACCESSORIES
Sink Grid: 221-012 (Formerly 511-936)
Cutting Board: 511-137
Deluxe Strainers: 950-224, 950-225
WARRANTY
Blanco America’s SILGRANIT® Series sinks feature
a LIMITED LIFETIME WARRANTY to be free of all
manufacturing defects under normal use. See our
complete warranty for details.
While Blanco America endeavors to provide accurate
information, all dimensions are nominal, cannot be
guaranteed, and are subject to change or cancellation.
Blanco America assumes no responsibility for use of
superseded or voided specifications.
PRDDUCT SPECIFICATION
Drop-ln/Undermount sink to be 1-1/2 bowl design,
20-1/2" in length and 15" in front-to-back depth. Sink
to be made from Silgranit® hard composite material.
Sink to feature straight bowl sides with 5/8" cutout
corner radius. Sink to be Blanco (Check one)
□ Model 511 -660 □ Model 511 -661
□ Model 511 -662 □ Model 511 -663
□ Model 511-664
with left bowl depth of 8" and right bowl depth of 6".
Additional knockout hole location:________________.
□ White 511-661
□ Anthracite 511 -662
□ Café Brown 511 -664
□ Biscuit 511-660
□ Metallic Gray 511 -663
MODEL 511-660 Shown
NDMINAL DIMENSIDNS
CUTOUT BOWL DEPTH DRAIN DIAMETER
OVERALL SIZE LEFT RIGHT LEFT RIGHT
20-1/2x15 19-3/4 X 14-1/4 8 6 3-1/2 2
DXF cutout templates (Undermount and Drop-In versions)
available on our web site.
JDB INFDRMATION
Job Name:__________
Contact:
KNDCKOUT HDLE LOCATIONS
Pre-drllled for single-hole faucet.
B
Date Specified:
Specifier:______
» o
o o
Contractor:
BLANCO AMERICA
800.451.5782
www.blancoamerica.com
© 2008 BLANCO AMERICA
06/08
SPEC-003