Aiphone MYW-CA User Manual

Myw-ca, Alphone, Pantilt separate camera adaptor

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

83070400

1092

@

® AlPHONE

PanTilt Separate Camera Adaptor

Model;

V

MYW-CA

(Camera adaptor)

J

INSTALLATION MANUAL

MYW-CA is a surface-mount box for attaching MY-CA PanTilt video door station inside,

so that MY-CA can work as surveillance camera.

INSTALLATION — How to mount MY-CA into MYW-CA

1. Removing the MY-CA chassis;

Loosen the tamper-proof screw on front case, and remove
the back frame. Unscrew at one point, and open the chassis.
Pull off CN102 connector, and then reattach the chassis.

When reattaching the

chassis, be careful that
the weather-stripping

(string) should rest
attached.

MY-CA

-WEATHER­

STRIPPING

INSIDE CHASSIS

WEATHER-STRIPPING

BACK FRAME

MY-CA

2. Connecting two leads to MY-CA;

Locate the MY-CA unit inside the MYW-CA box.
Connect two black and white leads to AI, A2

terminals on MY-CA.

Wiring is non-polarized.
Attach back plate with all 6 screws securely.

SCREW (6)—

(supplied)

BACK PLATE

Remove a seal on camera cover before mounting MY-CA.
Be careful not to scratch the cover surface.
To clean, use soft cloth.

3. Installing the MYW-CA unit;

This shows an installation example of MYW-CA camera unit,
along with lE-JA audio door station, and DP-600Z motion detector.

At the entry (under the eaves)

CAMERA UNIT

TAMPER-PROOF
SCREW

COVER

CN102

MY-CA

(without back frame)

BLUE

YELLOW

RED
BROWN

BLACK

WHITE

(Each pair wiring is non-polarized)

to; Main video monito!

!■ to; Audio door station

to; Motion detector

MOTION DETECTOR

DP-600Z (Instructions

furnished with
DP-600Z)

WOOD

SCREW (4)

Adjust MYW-CA direction
with these 2 screws and

the center hexagonal bolt.

INSIDE THE HOUSE

6-wire cable

(approx. 1.5m/5‘ long)

TERMINAL BOARD

(locally available)

or WIRE NUTS

The MYW-CA cable should be "U"-shaped

to allow easy run off of water, etc.

AUDIO

DOOR STATION

lE-JA

!ito

Mounting accessories;

Attach the mounting base with 4 wood screws, and the

arm with hexagonal bolt.

WOOD SCREW (4)

HEXAGONAL BOLT
& WASHER

SCREW & WASHER (2)--------

and SCREW (6) for back plate

As shown, mount the MYW-CA unit to the hardware supplied.
Provide a terminal board locally available, on which connect wires from main video monitor, motion detector & door station.
Water-proof the junction parts of the cable, if exposed.

Advertising