Arkon CM035-ST-2 User Manual

Arhon, Cm035-st-2, Vehicle specific mount swivel amps pedestal

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CM035-ST-2

I

Vehicle Specific Mount Swivel AMPS Pedestal

CM035-ST-2 4-ho!e AMPS to
Dual T-tab conversion head

CM035-ST 4-hole mount /
AMPS to T-tab conversion
head

o o

CM035-ST-AMPS 4-hole AMPS
Adapter Plate (for Sirius, and other
devices without a T-slot)

A typical 4-Hole AMPS pattern
{Cradle not included)

Package Contents:

(1) CM03S-ST or CM035-ST2 or CM035-

AMPS Vent Mount Assembly

(4) Screws for vehicle specific mounting

bracket (not included)

(4) Screws for optional dash or console

mounting.

NOTES:

1. Drilling onto the dash or console can
permanently damage the vehicle.

Vehicle Specific Mount Installation Instructions

Step 1

Install the vehicle specific mount (sold

separately by other manufacturers)

according to the instructions included

with your vehicle specific mounting

bracket (see example below).

Step 2. Line up the CM035-ST pedestal with the

4-hole AMPS pattern on the mounting

bracket and use the included screws to

attach the pedestal to the head.

Step 3. Loosen the swivel tightening knob by

turning it counter clockwise. Adjust the

angle of the pedestal head as needed,

then retighten to secure.

(VSM brackets sold separately by other manufacturers)

Brodit

Bracketron ProClip

THB Bury Pro.Fit

Panavise

All brand names and product names are tradenrarks or registered trademarks of their respective owners.

Installation Instructions for AMPS Pedestal Mount

Step 3. Use included screws and bolts to attach

CM035-ST-2 to any AMPS head pedestal to

provide swivel action. Any DualT-tab cradle (sold

separately) can then be attached.

Dash or Console Mounting Installation Instructions

Step 3. Use included self-tapping screws to attach the

pedestal to dash or console.

Warning: Drilling onto the dash or
console will permanently damage the
vehicle. Do not mount in an airbag
deployment zone. See warning below.

A

Safety Precautions / Warning
Drilling onto the floor or console can permanently damage the vehicle.

Use caution and consult a mobile install professional to avoid drilling
into the gas tank, electrical system or other highly sensitive vehicle
components.

Arkon Resources, Inc. is not responsible for any damages caused to
your car, your device, or yourself due to the installation or use of this
mounting solution.

ARHON

RESOURCES INC. The Mobile Mounting Specialists'“

Consumer Hotline:

www.arkon.com

(USA) (800)841-0884

Arcadia, CA 91006 USA

(INT'L) (626)254-9005

Made in Taiwan

Mon-Fri. 9am-5pm, PST © Copyright 2007 Arkon Resources, Inc.

Advertising