ADT Security Services Commercial Fire & Burglary Alarm System FOCUS 200 PLUS User Manual
Security system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Introduction
- FOCUS® 200 PLUS Features
- Control Unit
- Operating Panel
- Protection Points and Groups
- User Access and Security
- Automated Event Recording and Printing
- Summary
- Introduction
- Introduction
- Operating Panel Functions
- Normal Inactive Screen
- Responding to Alarms
- Viewing Current Alarms
- Entering Your Personal ID Number
- The Navigational Menu Selections
- Turning BA Groups Off
- Action Menus 1-4 - Main Features
- Action Menu 1
- Action Menu 2
- Action Menu 3
- Action Menu 4
- Summary
- Operating Panel
- Action Menus
- Action Menu 1
- Action Menu 2
- Action Menu 3
- Action Menu 4
- Introduction
- User Data
- Note: Upon installation or initial system setup, one user (e.g., System Manager) will be assigned the “Privilege Level” to perform the following functions:
- • Open outside of the schedules (Irregular open).
- • Bypass burglar alarm (BA) protection points.
- • Change temporary schedules.
- • Change permanent daily schedules and the real-time.
- • Change, add, and delete user names, ID codes, card/key codes, cancel dates, and “Privilege Levels” for users.
- Entering or Changing a User Name
- User Selection Menu
- Deleting a User ID Code
- User Selection Menu
- Assigning or Changing User Access
- User Seiection Menu
- Changing the Time and Date
- Time Selection Menu
- Note: Change will not appear unless all BA groups are off.
- Note: Those users who have been assigned only the privilege level of “Change temp sched” are limited to time changes within 5 minutes of the current time displayed on the screen.
- Note: Before changing the time or date, turn off all BA groups.
- Daily Operating Schedules
- Time Selection Menu
- Time Selection Menu
- Holiday Description and Dates
- Time Selection Menu
- Group/Point Descriptions
- Turning On Burglary Protection
- Action Menu 1
- Turning Off Burglary Protection
- Turn Off Menu
- System History Log
- History Selection Menu
- Bypassing/Unbypassing Burglary Protection
- Bypass Selection Menu 1
- Group Selection Menu
- Bypass Selection Menu 2
- Extending Close Time
- Sending Messages to a Pager
- Burglary Protection Points (Audible)
- Protection Points (Visuai)
- Protection Groups
- Testing Holdup, Fire, and Supervisory Devices
- Bell and Operating Panel Display
- Note: A test pattern of all LCD elements will be shown for 4 seconds, and
- the bell will ring for the last 4 seconds of this 30-second test. Walk to an
- area where the bell can be heard to verity its operation.
- Trouble or Error Display System has battery power only.
- Cannot turn on! AC power is off.
- Description
- Action
- About Fire Alarm Codes
- Code Enforcement
- ADT’s FOCUS 200 Plus Fire Alarm System Capabilities