Installation, Selecting projector orientation [image flip h/v, Selecting communication speed [communication speed – Canon LV-X6 User Manual

Page 55: Disabling the cabinet buttons [key lock

Advertising
background image

46

5. Using On-Screen Menu

[Installation]

Selecting Projector Orientation [Image flip H/V]

This sets your image for your type of projection application. The options are:
front projection, rear projection, ceiling mounted projection and rear ceiling mounted projection.

Selecting Communication Speed [Communication speed]

This feature sets the baud rate of the SERVICE PORT (Mini DIN 8 Pin). It supports data rates from 4800 to 19200 bps.
The default is 19200 bps.
Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate
may be recommended for long cable runs).
Your selected communication speed will not be affected even when [Reset] is done from the menu.

Disabling the Cabinet Buttons [Key lock]

This option turns on or off the Key Lock function for cabinet buttons.

NOTE:
• The Key lock setting will not affect the remote control or PC control functions.
• When the cabinet buttons are disabled, pressing and holding the BACK button on the projector cabinet for about 10 seconds

will change the setting to enable.

• The Key lock icon will be displayed at the top right of the menu when Key lock is enabled.

None

Rear, Ceiling mounted

Rear

Ceiling mounted

Advertising
This manual is related to the following products: