Alvin Chair DC410 User Manual

Assembly instructions for chair no. dc410, Part list key qty description

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Assembly Instructions for
Chair No. DC410

PART LIST

KEY QTY DESCRIPTION

1

5

Casters or Glides

2

1

Base

3

1

Gas Cylinder

4

1

Cylider Cover

5

1

Seat Plate

6

1

Seat

7

1

Backrest + Plastic Cover

8

1

Connector Cover

9

1

Backrest Height Adjustment Knob

10

1

Backrest Stopper

11

6

Seat Plate Screws

12

1

Footrest

13

1

Knob For Footrest

PREVENTIVE MAINTENANCE AND WARNING!

USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.

00 NOT USE THIS CHAIR AS A STEP STOOL / LADDER.

DO NOT USE CHAIR UNLESS ALL BOLTS . SCREWS AND KNOBS ARE

TIGHT . AT LEAST EVERY SIX MONTHS . CHECK ALL BOLTS . SCREWS

AND KNOBS TO BE SURE THEY ARE TIGHT.

’ IF ANY PARTS ARE MISSING . BROKEN . DAMAGED OR WORN . STOP

USE OF THE PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY

AUTHORIZED PARTS.

' FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS

INJURY.

The Connector
plastic bellow is
(orned on the
side in order to
insert onto the
rear of
seat plate.

y

Put the plastic stopper
into the backrest post
hole, after assembling
backrest post to
Mechanism.

Alvin & Corrpany, Inc. Bloomfield, Ct Grand Prairie, TX www.alvinco.com

Advertising
Table of contents