Audiovox IM-100 User Manual
Rg.1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION GUIDE FOR:
RADIO MODELS
IM-100/IM-200/IM-300
Printed In Korea 1S0-4O75 .
OJN MOUNTING (EXAMPLEiVOLKSWAGON)
SEE FIG. 1
1. Verify opening is within following dimensions;
A. Height 52mm-53mm
(2
3/64'- 2 3/32")
S. Width fsamm-‘104mm (7 5/32" * 71/4*}
2. If opening Is less, carefull file to esoct size
required {DO NOT OVER FILE>
3. Remove din sleeve from radio arid place Into
opening,
4. Bend tabs outward to lock sleeve Into dash.
5. Pre-wire radio. Slide radio into din sleeve until It
locks into place. Note: Use either near bushing
or perforated strap to sstMjre rear of radio.
RADIO REMOVAL {IF NECESSARY)
1, Unsnap trimring on face of radio.
2. Insert removal tool In slotted holes on sides of
radio uritil bottomed. Spread tools outward slightly
and pull radio toward you. Remove tools end
slide radio fully out.
RG.1
TRfMBEZEL (INSTALLED ON RADIO)
HEMOVAl TOOt.