Aiphone PG-60A User Manual
Paging amplifier, Alphone, Instructions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AlPHONE
PAGING AMPLIFIER
MODELS: PG-10A
(10 watts output)
PG-30A
(30 watts output)
PG-60A
(60 watts output)
AlPHONE PG-A paging amplifiers are designed for use with AlPHONE paging intercoms. 10 watts,
30 watts and 60 watts ampifiers are available and may be installed in multiples for greater output.
- INSTRUCTIONS -
. This symbol on the nameplate means the product
Ly is Listed by Underwriters Laboratories Inc.
SPECIFICATIONS
* Power output;
* Distortion;
* Frequency response;
* Input;
* Output;
* Power requirements;
* Power consumption;
* Dimensions;
Weight:
NAMES AND FUNCTIONS
(T)
Power lamp
@ Power switch
(
3
) AC cord
(i) Output (25/70.7 volt alternative)
(5)
Circuit breaker
@
Input terminals (A & E)
@ Fuse holder
(D G terminal for grounding
PG-lOA..............10 watts rms
PG-30A..............30 watts rms
PG-60A..............60 watts rms
Less than 3% at 1,000 Hz rated output
±3 db, 100- 15,000 Hz
100 mV for rated output
25 volts and 70.7 volts balanced
120 volts AC, 50/60 Hz
PG-lOA..............30 watts
PG-30A..............75 watts
PG-60A..............130 watts
PG-lOA
245mm x 77mm x 152mm, 9-11/16" x 3-1/16" x 6"
PG-30A & PG-60A
340mm x 95mm x 205mm, 13-5/16" x 3-3/4" x 8-1/16"
PG-lOA................2.7 Kg, 6.0 LBS
PG-30A................5.0 Kg, 11.0 LBS
PG-60A................6.5 Kg, 14.3 LBS