Denso BHT-6000 - Manual (Page 144)

129
Chapter 4. Error Messages
DOWNLOAD
JIS 1
Memory used !!
■ Problem
The memory area for the JIS font (JIS Level 1 font
in this example) has been occupied by user pro-
grams.
■ Solution
Copy the files stored in the flash ROM onto the
RAM, and then delete the ROMed files.
During downloading of JIS1/JIS2 font
file
DOWNLOAD
JIS 1
File mismatch !!
■ Problem
The file type is mismatched.
(Examples)
• At the host computer, you attempted to
download not the JIS1/JIS2 font file, but user
programs.
• Although the JIS Level 1 font file was already
selected on the BHT-6000, the host computer
attempted to download the JIS Level 2 font file.
■ Solution
Press the C key to return to the SYSTEM MENU.
(To download user programs, select the regular
downloading menu.)
■ Problem
Downloading has failed.
■ Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Chapter 2, Subsection 2.5.3, [4.6] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
DOWNLOAD
JIS 1
Communication
error !!
Retry?
1:Yes 2:No