Denso BHT-6000 - Manual (Page 148)

133
Chapter 5. Handling the CU-6000 (Option)
Chapter 5
Handling the CU-6000 (Option)
This chapter describes the handling procedure of the CU-6000, the interfacing with the
host computer, and the charging of the Ni-MH battery cartridge.
5.1 Functions of the CU-6000 .............................................................................................. 134
5.2 Components and Functions .......................................................................................... 134
5.3 Applying Power to the CU-6000 .................................................................................... 136
5.4 Communicating with the Host Computer .................................................................... 137
5.4.1 Setting the Transmission Speed of the CU-6000 .................................................... 137
5.4.2 Interface Cable Connection ...................................................................................... 137
5.4.3 Interfacing with the Host Computer ........................................................................ 138
5.5 Charging the Ni-MH Battery Cartridge (using the CU-6001) ....................................... 139
5.5.1 Ni-MH Battery Cartridge Loaded in the BHT-6000 .................................................. 139
5.5.2 Ni-MH Battery Cartridge Alone ................................................................................ 141
[ 1 ] Fully Discharging (Refresh) and then Charging ................................................... 142
[ 2 ] Charging Only ......................................................................................................... 143
5.6 RS-232C Interface Specifications .................................................................................. 144
[ 1 ] Interface Connector and Pin Assignment ............................................................. 144
[ 2 ] Interface Cable Connection .................................................................................... 145