Denso BHT-6000 - Manual (Page 150)

135
Chapter 5. Handling the CU-6000 (Option)
Status indicator
(Not provided on CU-6002)
Shows the status of the CU-6001.
DATA
CHG2
POWER
CHG1
Battery cartridge slot
(Not provided on CU-6002)
To charge a Ni-MH battery cartridge all by itself,
load it into this slot.
POWER LED (green)
Lights when the power is applied to the CU-6000.
DATA communications LED (green)
Lights when the BHT-6000 is communicating with
the host computer.
CHG2 LED (Battery cartridge charge lamp)
(yellow)
Lights when the CU-6001 is charging a Ni-MH
battery cartridge all by itself. Upon completion of
charging, this LED flashes at 2-second intervals.
During discharging of a Ni-MH battery cartridge,
this LED flashes at 0.4-second intervals.
CHG1 LED (BHT-6000 charge lamp) (yellow)
Lights when the CU-6001 is charging a Ni-MH
battery cartridge loaded in the BHT-6000. Upon
completion of charging, this LED flashes at 2-
second intervals.