Denso BHT-6000 - Manual (Page 36)

21
Chapter 2. Getting Started the BHT-6000 and System Mode
2.4.2 Setting-up 2: Initializing the BHT-6000 and
Setting the Calendar Clock
[ 1 ] Initializing the BHT-6000
Power on the BHT-6000 by pressing the PW key.
Either of the following messages will appear, either in English or Japanese.
Proceed to the initialization procedure given on the following pages. The initialization
procedure does not initialize the system area of the flash ROM.
In the following cases, one of the above messages will appear. In such in-
stances, it is necessary to initialize the BHT-6000.
• The BHT-6000 is first powered on from the time of purchase.
• The BHT-6000 is powered on after being discharged completely.
System error!
Contact your
administrator.
Note the
error drive.
(DRIVE B)
System error!
Contact your
administrator.
Note the
error drive.
(DRIVE A)