Denso BHT-6000 - Manual (Page 53)

38
■ Problem
Downloading has failed.
■ Solution
To retry downloading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Subsection 2.5.3, [4.6] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
DOWNLOAD FILE
(A:)
XXXXXXXX.XXX
Communication
error !!
Retry?
1:Yes 2:No
DOWNLOAD FILE
(B:)
Drive A memory
short !!
Retry?
1:Yes 2:No
■ Problem
The RAM is insufficient for copying files stored in
the flash ROM.
■ Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the RAM.
When receiving downloaded files to the flash
ROM, the BHT-6000 may copy the files
stored in the flash ROM into the RAM. This
requires an unused user area of 128 kilobytes
in the RAM. If there is no area for copying
in the RAM, the error message shown at left
will appear.
NOTE