Denso BHT-6000 - Manual (Page 70)

55
Chapter 2. Getting Started the BHT-6000 and System Mode
[4.6-3] Setting the interface port
SET COM PORT
1:BASIC
OPT IFC
2:SYSTEM MODE
OPT IFC
Selecting the "3:COM PORT" on the SET COM menu
calls up the screen shown at left.
Reversed is the current setting.
1 BASIC: Selects the optical or direct-
connect interface port to be
used
for user programs
written in BHT-BASIC 3.0
(OPEN "COM:" or XFILE
statement).
2 SYSTEM MODE: Selects the optical or direct-
connect interface port to be
used
for downloading or
uploading files in System
Mode.
Select a desired item by using the numerical keys
or F5 and F6 keys, and then select a desired
setting by using the F7 and F8 keys.
To return to the SET COM menu, press the C key.