Apex Digital LD4088 User Manual
A p x, Quick setup guide, Ld4088
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A P
X
LCD
DIGITAL
40
HDTV
40” Diagonal Viewing Area
QUICK SETUP GUIDE
LD4088
What's in the box
Remote Control
2 X AAA Batteries
Power Cord
User Manual
Quick Setup Guide
Pedestal Base
Pedestal Instructions
Contact Customer Service
Before contacting your retailer, read the User Manual thoroughly. This Quick Setup Guide will answer the most frequently asked questions for setup, installation and use.
Take a moment to register your product at .
We encourage you to visit us at for answers to your questions. Access our 24 hour Customer Support and FAQ’s page or receive personalized
email technical support. Order accessories online or speak to a customer support representative at (866)427-3946.
TV Rear Panel
CD
MASTER POWER
COMPONENT 2 YPbPr
Y(#)pb(#)
Pr(§)
l
(5)
r
(5)
y
(§) Pb(5) Pr(5)
l
(5) R(g)
COMPONENT 1 YPbPr
RFIN
ANTENNA
The rear panel illustration is provided to show video INPUT connections (and SPDIF digital audio output) available to you. Reference the INPUT labels then determine the connections best suited to hook up your HD and non-HD equipment.
See the user manual for complete details.
RF Input Connection
• Use a rooftop or amplified indoor antenna
to receive local HD signals over the airwaves.
For assistance in choosing the correct one
for your area, visit
TV REAR PANEL
or
• CableTV - Subscribe to HDTV programming
through your local cableTV provider. An HD
o
cable box is required.
• Satellite - Subscribe to HDTV programming
through DirecTV or Dish network. An HD set
top box is required.
• Connect the RF coaxial (75 ohm) cable
from your existing TV antenna or the cable
wall outlet to the RF input located on the
TV’s rear panel.
• Run Channel Auto Scan (refer to next step)
to receive available local digital TV channels
into the television’s tuner.
A.
-■>
■m-
Ca ble Wall Outlet
Initial TV Setup
After you have initially connected your TV antenna or cable (no set top box), turn the television ON. A screen will display asking you to run a
Channel Auto Scan. It is here where you will select AIR/CABLE options to search and receive available local digital channels.
Ptaata
Run
Ctwnnal Auto Scan
In the TV menu
• Press the MENU button on the remote
control.
NOTE: For cable or satellite users with no TV
antenna, there no need to run Channel Auto
Scan. Connect your cable or satellite set top
box to one of the available inputs on the TV
for viewing.
• Using the ◄ ► arrow buttons, scroll to
highlight TV menu.
• Press the down T arrow button to highlight
AiR/CABLE, then press A ► arrow buttons to
select.
NOTE: Select AIR when connecting an
indoor/outdoor antenna. Select CABLE when
you subscribe to a pay television service (with
no set top box) and the television is con
nected through the RF input.
• Press the T arrow button to select Auto Scan.
• If AIR was selected in the previous step,
press the right ► arrow button twice to start
Auto Scan.
• If CABLE was selected in the previous step,
press the right ► arrow button. CABLE SYSTEM will
display and be highlighted. Press the right ►
arrow button to select STD > IRC > HRC > Auto
(Auto is recommended).
• Press the down T arrow button to highlight Auto
Scan and press ENTER to start Auto Scan.