Video components and advanced connecting, Connections, Connecting multi channel audio source – Luxman LR-8500 User Manual

Page 11: Connecting an external power amplifier, Remote ir input, Zone ii ir input, Remote ir output, Zone ii

Advertising
background image

- 11 -

REMOTE IR
IN/OUT PUT

SATELLITE TUNER

DIGITAL

OUT

AUDIO

OUT

L

R

VIDEO

OUT

POWER AMPLIFIER

FRONT

L

R

SURR.

SURR.

BACK

DVD AUDIO PLAYER

or

SACD MULTI CHANNEL PLAYER

FRONT

L

R

SURR.

SUB

WOOFER

SURR.

BACK

SUB

WOOFER

CENTER

CENTER

ZONE II IR
INPUT

VIDEO COMPONENTS AND ADVANCED CONNECTING

CONNECTING MULTI CHANNEL AUDIO SOURCE

The 7.1 CH DIRECT INPUT jacks are for multichannel audio
source such as a SACD multichannel player, DVD audio
player or external decoder.
If you use these jacks, switch on the 7.1 CH DIRECT INPUT
and set the 7.1 CH DIRECT INPUT level by using the 7.1
channel input level menu.

CONNECTING AN EXTERNAL POWER AMPLIFIER

The PREOUT jacks are for connecting external power
amplifiers.
Be sure to connect each speaker to the corresponding
external power amplifier.

REMOTE IR INPUT

If the LR-8500's front-panel IR sensor is blocked due to cabinet
doors or other obstructions, an external IR sensor may be
used. Connect the output of the sensor to this jack.

ZONE II IR Input

Connect the output of an IR sensor in a remote room to this
jack to operate the LR-8500's

ZONE II

control system.

REMOTE IR OUTPUT

This connection permits the IR sensor in the receiver to serve
other remote controlled devices. Connect this jack to the "IR
IN" jack on LUXMAN (or other compatible) equipment.

Connections

Advertising