American Energy Systems BC2500 Auto Ignition System User Manual
Auto ignition system part #bc2500
Advertising
Auto Ignition System
Part #BC2500
used on BabyC and Winchester units
• Turn off power on control panel and unplug from the power supply.
• Open up left side panel and find the ½” collar, locate on the igniter plug.
• Locate wire harness leads
for the igniter red lead and
white lead.
• Using 1/8” allen wrench loosen set screw from ½” collar located on the igniter
plug.
• Remove igniter plug pull towards
the back of the unit.
Advertising