ClearCube ClientCube 2 with KM - Manual

Page 1 of 14 P/N G0200161 Rev F, 1.5.01.19.2015
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
ClientCube 2 with
Secure KVM or Secure KM Switch
Quick Start Guide
About ClientCube 2 with Secure KVM or Secure KM Switch
Package
contents and
documentation The list below shows the contents of a ClientCube 2 ® package.

ClientCube 2, preconfigured with

Zero clients

Device cabling including ClientCube 2 power cable and adapter, zero client power
cables, video cables (with KVM switch only), and (depending on model) USB smart card
cabling for KVM switch

Belkin ®
Secure KVM switch or Belkin Secure KM Switch

This Quick Start Guide

Secure KVM Switch User Manual or Secure KM Switch User Manual, and

Zero Client Quick Start Guide for installed zero clients.

Dual-link DVI cable adapters (Y-cables) for high-resolutions monitors (2560 × 1600).
See Zero Client Quick Start Guide for information about using dual-link DVI cables.
For more
information The section above shows documentation included with the ClientCube 2. For additional information
about PCoIP
® technology (including zero clients and PCoIP host cards), see the documents below at
www.clearcube.com/support :

PC-over-IP System User’s Guide

PC-over-IP Device Firmware Support and Compatibility Guide
Continued on next page