Eurocom P180HM Leopard 2.0 - Manual (Page 105)

BIOS Utilities
Security Menu 5 - 11
5
Security Menu
Set Supervisor Password (Security Menu)
You can set a password for access to the Aptio Setup Utility. This will not affect
access to the computer OS (only the Aptio Setup Utility).
Note: To clear existing passwords press Enter and type the existing password, then
press Enter for the new password (without typing any password entry) and Enter
again to confirm the password clearance.

Security Menu
The changes you make
here affect the access
to the Setup utility itself,
and also access to your
machine as it boots up
after you turn it on.
These settings do not
affect your machine or
network passwords
which will be set in your
software OS.
Figure 5 - 4
Security Menu

Password Warning
If you set a boot pass-
word (Password on boot
is “Enabled“), NEVER
forget your password.
The consequences of
this could be serious. If
you cannot remember
your boot password you
must contact your ven-
dor and you may lose all
of the information on
your hard disk.