Eurocom P180HM Leopard 2.0 - Manual (Page 122)

Upgrading The Computer
6 - 14 Upgrading the System Memory (RAM)
6
Removing the Secondary System Memory (1 memory socket)
1. Turn off the computer, and turn it over and remove the battery.
2. Remove screws & from the bottom of the computer.
3. Turn the computer over, open the Lid/LCD, and carefully (a cable is connected to
the underside of the LED cover module) unsnap up the LED cover module from
point
on the right.
1
2
Figure 6 - 12
Bottom LED Cover
Module Screws
Figure 6 - 13
LED Cover Module
Removal
1 2
3
3