Eurocom P180HM Leopard 2.0 - Manual (Page 127)

Upgrading The Computer
Upgrading the System Memory (RAM) 6 - 19
6
16. Snap the LED cover module down at the top of the module at points & .
17. Push the LED cover module down on the left side at point , and then slide the
module to the right (as illustrated) and snap down to secure it in place.
18. Replace the screws on the bottom of the computer (see Figure 6 - 12 ).
19. Restart the computer to allow the BIOS to register the new memory configuration
as it starts up.
Figure 6 - 21
LED Cover Module
Slide to the Right &
Snap Down

LED Module Cable
Make sure you recon-
nect the LED Module
cable
(see Figure 6
- 14 ).
5
21 22
23
21 22
23