Eurocom P180HM Leopard 2.0 - Manual (Page 189)

Modules
Bluetooth Module 7 - 55
7
3rd Party Bluetooth Networking Setup
This information applies to the combo Bluetooth and WLAN module only.
1. Make sure the Bluetooth module is powered on.
2. Double-click the My Bluetooth application on the desktop (or access it from the
Programs/All Programs menu).
3. Click My Bluetooth Settings (see Figure 7 - 30 on page 7 - 52 ).
4. Click Network Settings (make sure the Bluetooth module is powered on.
5. Click Enable Bluetooth Network and click OK.
6. A message will appear in the notification area to confirm that the network driver
has been installed.
Figure 7 - 33
Network Settings