Eurocom P180HM Leopard 2.0 - Manual (Page 236)

NVIDIA Video Driver Controls
B - 8 Configuring an External Display (NVIDIA)
B
Duplicating the Displays
1. Attach your external display to the DVI-Out Port or HDMI-Out port, and turn it on.
2. Go to NVIDIA Control Panel (see page B - 2 ).
3. Double-click Display (if the sub-menus are not visible), and then click Set up
multiple displays.
4. Any attached display will appear under “1.Select the displays you want to use.”
5. Click the tickbox alongside any display you wish to use.
6. Right-click one of the display icons and click “Duplicate displays....” (select which
is to be the primary display) to duplicate the desktop on both displays.
7. Click Apply > Yes to save any changes.
Figure B - 5
Duplicate
Displays
Select Apply > Yes
Right-click to select Duplicate displays
and which is to be used as the primary clone
to save changes