Eurocom P180HM Leopard 2.0 - Manual (Page 243)

NVIDIA Video Driver Controls
SLI Multi GPU Configuration & Battery Power B - 15
B
SLI Multi GPU Configuration & Battery Power
Note that due to the high power and system demands created by enabling SLI Con-
figuration, you should not enable SLI configuration if your computer is powered
by battery only. If you attempt to run an SLI configuration when the computer is
powered by the battery only, then system problems may occur.
• If the computer is currently powered by battery only do not enable SLI config-
uration.
• If you have currently enabled SLI configuration, and the computer is powered
by the AC/DC adapter, do not switch to battery power only (or go to the
NVIDIA Control Panel and disable SLI configuration before switching to bat-
tery power only).

SLI Configuration &
Multiple Displays
Note that if SLI configu-
ration is enabled only a
Single display may be
used as the display de-
vice.
DO NOT use the Fn +
F7 key combination to
toggle through display
options when SLI is en-
abled. SLI supports only
a Single display, and at-
tempting to configure
dual displays may cause
an error. Use the NVID-
IA control panel to select
the display to be used.