Lock'er Down Model LD 2013 - Manual

Installation Instructions for Model 2013 Console Safe
1.
First thing before you begin installation of your new console safe, it is a good idea if you have a
combination lock, to set your personal combination. Those instructions are on a separate sheet.
2.
Empty the contents of your console and remove the factory pad to expose the four bolts that
hold down the console.
3.
Remove the right rear and left front bolts.
4.
Use a flat screw driver or similar tool to remove the power port with the surrounding bezel. It
will be replaced later.
5.
Set the console safe inside the console and use the included longer bolts to hold it down.
6.
Place the included neoprene pad in the bottom of safe.
7.
Replace the power port and you are done.
8.
ENJOY
Lock'er Down® is a registered Trademark of Lock'er Down, Inc. US Reg. Number 4183198 All Rights reserved.