P.I. Engineering USB 3 Switch Interface - Manual

USB 3 Switch Interface
Product Manual
Part Number XK-1283-UJS3-R
3 Switch Ports
Made, Sold, and Supported in the USA
From P.I Engineering,
The No Slogan Company
www.xkeys.com
Box Contents
This package contains:
1- X-keys Switch Interface
1- Installation CD
1- Product Manual
Quick Start for Windows
1. Run the MacroWorks 3.1 (MW3.1) installation from the enclosed disc.
2. Plug in the X-keys Switch Interface and wait for Windows to recognize it.
3.
MW3.1 will display an icon in your Windows Taskbar. Click on the icon and
select the Switch Interface.
4. Press any switch connected to the Switch Interface (or double-click on the
port image) to begin recording a macro.
5. Type keystrokes or select text, shortcut, or function. Multiple lines of
keystrokes, text, shortcuts, and functions may be entered on a single switch.
6.
Press the switch again (or click Save) to complete programming.
7. When finished, close the programming window.
To quickly learn how to use MW3.1 watch the brief tutorials on the disc or on
our website. Consult the MW3.1 help file for complete instructions and tips on
programming and using your X-keys.
NOTE: Mouse and joystick commands are found in the Functions menu.
Mac Users
Install ControllerMate for X-keys from the enclosed disc or visit the Software
section of our website for a free download.
ControllerMate for X-keys is published by OrderedBytes in partnership with P.I.
Engineering. For full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.