Rigel Systems QuikFinder AA battery pack - Manual

AA Battery Holder Instructions
1) Remove QuikFinder from
Base, remove battery from
QuikFinder and note positive (+)
battery contact. 2) Place Quikfinder with knobs to right, side up
as shown. 3/8
th inch from back, make 1/4 th inch
deep notch in side using drill, clipper or other
tool as shown. This will not void your warranty.
3) Press AA battery electrodes
into coin cell battery holder with
red wire to positive (+) contact
and black wire to negative (-)
contact. 4) Tuck wires into
notch and stick battery
holder to side of
QuikFinder using
provided double sided
tape. 5) Reattach
QuikFinder to
baseplate, remove
Phillips screw from
battery holder to
remove battery holder
cover plate and insert
2 AA batteries and
you’re ready to go!
90 day limited warranty: Rigel Systems, 26850 Basswood Ave, Rancho Palos Verdes CA,
90275 warrants to the original consumer purchaser of its product that the product will be free of
defects in material or workmanship 5 years from the date of purchase under normal use. During this
warranty period, Rigel Systems will, at its option, repair or replace the product without charge for
parts or labor when delivered to Rigel Systems with proof of the date of purchase and a statement
of the problem with the product. Shipping and handling charges to Rigel Systems are your
responsibility. This warranty does not apply if the product has been altered or repaired by anyone
other than Rigel Systems or has been subjected to purchaser abuse, accident, negligence or
damage subsequent to purchase including battery damage to product. This warranty excludes
incidental or consequential damages resulting from the product or use of the product. The product is
not a toy. Keep away from children.
AA Battery Holder Instructions
1) Remove QuikFinder from
Base, remove battery from
QuikFinder and note positive (+)
battery contact. 2) Place Quikfinder with knobs to right, side up
as shown. 3/8
th inch from back, make 1/4 th inch
deep notch in side using drill, clipper or other
tool as shown. This will not void your warranty.
3) Press AA battery electrodes
into coin cell battery holder with
red wire to positive (+) contact
and black wire to negative (-)
contact. 4) Tuck wires into
notch and stick battery
holder to side of
QuikFinder using
provided double sided
tape. 5) Reattach
QuikFinder to
baseplate, remove
Phillips screw from
battery holder to
remove battery holder
cover plate and insert
2 AA batteries and
you’re ready to go!
90 day limited warranty: Rigel Systems, 26850 Basswood Ave, Rancho Palos Verdes CA,
90275 warrants to the original consumer purchaser of its product that the product will be free of
defects in material or workmanship 5 years from the date of purchase under normal use. During this
warranty period, Rigel Systems will, at its option, repair or replace the product without charge for
parts or labor when delivered to Rigel Systems with proof of the date of purchase and a statement
of the problem with the product. Shipping and handling charges to Rigel Systems are your
responsibility. This warranty does not apply if the product has been altered or repaired by anyone
other than Rigel Systems or has been subjected to purchaser abuse, accident, negligence or
damage subsequent to purchase including battery damage to product. This warranty excludes
incidental or consequential damages resulting from the product or use of the product. The product is
not a toy. Keep away from children.