RTA Products 2C-RTCK03 - Manual

INSTRUCTIONS MANUAL FOR 2C-RTCK03 iPad Case
Problems with your purchase?
Call customer support 866-782-8262
M-F,9am-5pm EST
E-mail:[email protected]
Bluetooth Keyboard for iPad2 and The
New iPad
Clean the silicone keyboard with water,alco-
Keyboard connected successfully
Packing Contents:
1.PU Leather Case w/Keyboard
2.USB Power Charging Cable
3.User Guide
1.Built-in wireless Bluetooth 2.0 silicone
keyboard.
2.Stylish protective PU leather case de-
signed for iPad .
3.iPad display stand for easy
viewing.
4.Built-in Rechargeable lithium battery
lasts for approximately 45 hours per
charge. Must be charged at least for 3
hours before first time use.
5. Special home screen key for one
touch access to variety of application.
6.Light weight,quiet keystrokes,water-
proof and dust-proof.
7.Energy saving keyboard sleep mode.
8.NOTE: VIEW iPad VERTICAL POSITION:
In order to view the iPad in the vertical position
the keyboard must be removed to allow for space
to stand the iPad .
1.Bluetooth 2.0 interface standard
2.Operating Distance to 10 meters
3.Modulation System:GFSK
4.Operatin Voltage:3.0-5.0V
5.Working Current:<5.0mA
6.Standby Current:2.5mA
7.Sleeping Current:<200μA
8. Charging Current:≥100mA
9.Standby Time:60 days
10.Charging Time:4-5 hours
11.Lithium Battery Life:3 years
12.Key Strength:80±10g
13. Key Life:5 million strokes
14.Operating Temperature:-10 - +55℃ Step 1:Turn on the power toggle switch.The
[power] and [Bluetooth] indicator light
will be in 5 seconds,then the light will
go off.
Step 2:Press on the [connect] button.The
[Bluetooth] indicator light will be
blinking ,and the [power] indicator
will be on.The keyboard is now ready
to be connected to iPad .
Step 3:Turn on and unlock iPad . Click on the
[settings] icon.
Step 4:On the settings menu,select item [General]
to access [Bluetooth] settings.Click on
[Bluetooth] to turn on the connection. iPad
will automatically search for a Bluetooth-
enabled device.
Step 7:Wireless keyboard connected
successfully.[power] indicator
light will stay on until the key-
board is switched off.
The wireless keyboard can be connected
to iPhone 3G, 3GS,4G and iPod Touch
that had installed iOS 4.0 or later.For other
Bluetooth enabled device,please verify the
Bluetooth standard &compatibility before
attempting to connect to the keyboard.
Step 5:Wireless Keyboard found.Click on the
device to connect.
Step 6:Enter the password code as displayed
on screen.
Connect Button
Power
Switch
[setting] icon
1.0 Product Features:
4.0 Charging
5.0 Energy Saving Sleep mode
6.0 Safety Caution
7.0 Cleaning
2.0 Keyboard Specification 3.0 Bluetooth Keyboard Pairing
Bluetooth Keyboard Specification and Pairing Instruction
iP ad, iP hone, iPod Touch are trademarksof Apple Inc.
1.
2.
3.
4.
5.
8.0 Troubleshooting
E nter password code using the wireless
keyboard
When the battery power is low,the [power]
indicator light will start blingking,it is time to
recharge the keyboard.
Step 1:Connect USB-B of the native USB power
cable to the keyboard charging interface
Step 2:Connect USB-A to the power adaptor or
computer's USB interface
Step 3:The [charge] red indicator light will stay on
when the keyboard is charging.Once it finished
charging,the [charge] indicator light will turn off.
iPad
Click on the keyboard to connect
Click to turn on Bluetooth setting
hol,or alcohol based disinfectant.
Unable to connect
Make sure the power switch is on.
Make sure the keyboard is within the
operating distance.
Make sure the battery is charged.
Make sure iPad Bluetooth setting is on.
Make sure wireless keyboard is connected to
iPad .
Make sure the wireless keyboard has been
paired with the iPad .
Unable to charge keyboard
Make sure the USB power cable is connected
properly to the keyboard and the power source.
Make sure thew all charger is plug into the power
outlet.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device.
Pursuant to Part 15 of the FCC Rules, these limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates usesage and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on.
This device complies with Part 15 of the FCC
Rules.Operation is subject to the following two
conditions:(1)this device may not cause harmful
interference, and(2)this device must accept any
interference received, in cluding interference that
may cause undesired opera
tion.
FCC Caution:Any change or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
The keyboard will kick into sleep mode when
it is inactive for 15 minutes,and the keyboard
[power] indicator light will go off.Toactivate
from sleep mode,just press any key and wait
3 seconds,the keyboard will come back on.
Keep the item away from sharp objects.
Do not place heavy object on top of the
keyboard.
Do not Microwave the item.
Do not force or distorted the keyboard.
Keep away from oil,chemical or any other
organic liquid.
(A)
(B)
1.
2.
3.
4.
5.
6.
1.
2.
This equipment complies with FCC radiation
exposurelimits set forth for an uncontroled
environment. End users must follow the specific
operating instructions for satisfying RF
exposure compliance.
This transmitter must not be colocated or operating
in conjunction with any other antenna or transmitter.
1.
2.
Special Note: