Singing Machine iSM395BT - Manual (Page 5)

4
Connection
Insert the small end of the AC adapter
into the DC IN jack on the rear of the unit.
Insert the other end (with the 2 blades)
into a conveniently located AC outlet
having 110-240V AC, 50/60Hz.
Notes:
• Only use the supplied AC adapter.
Failure to do so may cause a fire or
damage the unit.
• The AC adapter included with this unit
is for its use only. Do not use it with
other equipment.
• Turn off the unit before unplugging the AC adapter from the unit to avoid damaging the unit.
• When the unit is not going to be used for a long time, disconnect the AC adapter from the
AC outlet.
• If the unit acts erratically or malfunctions, unplug the unit, wait 20 seconds and plug it back in.
• Never use an AC adapter that is damaged. Route power lead in a safe manner and make sure
it is not subjected to trapping or pinching. If the power lead is damaged, refer to a qualified
service agent.
Connecting to AC Power
Connecting the Microphone(s)
Insert a microphone’s plug into the Mic 1
jack u. Insert the other microphone’s plug
into the Mic 2 jack v (if desired).
Note: Do not drop or tap the mic, as
damage to the mic or speakers may occur.
Do not spin the microphone around for the
same reason.
u v
iSM395bt-ENG-v4_Layout 1 7/26/13 8:50 AM Page 4