Sioux Tools SCOS1SAX User Manual

Warning

Advertising
background image

1

Form ZCE733A

Date 2014October8/E

Form ZCE733A
Date 2014October8/E
Page 1 of 30

INSTRUCTIONS & PARTS LIST FOR

SCO10S, SCO10A, SCO10AXL, SCOA1SAX & SCOS1SAX SERIES CUTOFF TOOLS

SERIAL “B”

CUTOFF TOOL SAFETY

Cutoff tools can cause flying particles.

Proper eye protection must be worn at all times by tool user and bystanders.

Flying particles can cause eye injury.

Power tools generate noise.

Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the

tool noise level is below 85 dBA. See the tool’s information sheet for the noise level.

Prolonged exposure to noise can cause hearing loss.

Power tools vibrate.

Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a

physician. See the tool’s information sheet for the vibration level.

Prolonged exposure to vibration can cause injury.

Rotating grinding wheels can cause cuts and abrasions.

Keep hands and other body parts away from grinding wheels to prevent cutting or pinching. Wear protective clothing and gloves

to protect hands.

Contact with rotating grinding wheels can cause injury.

Cutoff tools present a risk of entanglement.

Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do

not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could

become entangled with the tool.

Entanglements can cause injuries.

Grinding operations create dust.

Do not breathe grinding dust. Use approved mask.

Breathing grinding dust can cause injury.

This tool is not insulated for contact with electric power sources.

Do not use near live electric circuits. When drilling into walls, be aware that they may have hidden electric wires.

Electric shock can cause injury.

This tool is not intended for use in a flammable or explosive atmosphere.

Do not use this tool in a flammable or explosive atmosphere.

Explosions and fire can cause injury.

Grinding metals creates sparks that can ignite flammable materials and vapors.

Only grind metals if the area is free of combustible or explosive materials or vapors.

Explosions and fire can cause injury.

Overspeeding wheels can explode.

Check the speed rating of the accessory or the speed printed on the wheel. This speed must be greater than the nameplate

speed of the grinder and the actual speed of the grinder as measured with a tachometer. Do not exceed rated operating air

pressure.

Exploding wheels can cause injury or death.

Cutoff tools can generate unexpected movement.

Keep a firm grip on the tool at all times. Be sure your body position allows you to have control of the tool at all times. Make sure

your footing is secure. When possible, secure the work piece in a vice or with clamps.

Unexpected tool movement can cause injury.

Using excessive force on a tool makes it hard to control.

Do not force tool.

Hard to control tool can cause injury.

Taping or wiring the throttle valve in the “ON” position will prevent the tool from shutting off if the tool should jam or malfunction or if

anything unexpected happens.

Do not wire or tape down the “On-Off” valve of any power tool.

Tools that are prevented from shutting off can cause injury.

Poorly maintained and lubricated tools can fail unexpectedly.

Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See the tool’s information

sheet to find out what other greases and oils to use. Do not drop the end of the hose on the floor where it will pick up dirt and

transport it into the tool. See information sheet for any additional maintenance requirements.

Unexpected tool failures can cause injury.

SAVE THESE INSTRUCTIONS!

250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com

Original

Instructions

WARNING

When used improperly power tools can create hazardous situations.

Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!

Improperly used power tools can cause injury or death.

Read and understand these instructions before operating this tool.

Advertising
This manual is related to the following products:
Table of contents