Star Headlight & Lantern SP3860-2 Switch Panel User Manual

One year limited warranty, On/off)(on/off) switches

Advertising
background image

REV. E 11/4/04 PLITSTR121

WIRING INSTRUCTIONS FOR STAR SWITCH #SP3860-2

(ON/OFF)(ON/OFF) Switches




















1. IMPORTANT: Please read all of the following instructions before installing your

new switch. This instruction sheet applies only to the model listed at the top of this
sheet.

2. CAUTION: All of our DC powered warning lights are polarity sensitive. These

lights are polarity protected only if the appropriate fuse is used. All wires
connected to the positive terminal of the battery should be fused at the battery for
their rated load, in addition to the fuse provided at the switch panel. Testing the
light before this fuse is properly installed will void the warranty on the switch
and light.

3. The black wire from terminal 3 of SW1 is the ground lead and should be

connected to a good chassis ground.

4. Connect the red wire from terminal 2 of SW1 to the red wire from your first warning

light.

5. Connect the blue wire from terminal 2 of SW2 to the red wire from your second

warning light.

6. Connect the fused red wire from terminal 1 of SW1 to the positive side of the

12VDC power through an appropriate fuse based upon the current draw of the
light(s) you are installing. Check the label on the warning light for proper voltage
and current.

7. When properly ins talled, SW1 will be on the left side of the switch panel (front view)

and switch warning light #1 on and off, and SW2 will be on the right (front view) and
switch warning light #2 on and off.

If you have any questions concerning this or any other Star product,

please contact our Customer Service Department at (585) 226-9787.


































If you have any questions concerning this or any other product,

please contact our Customer Service Department at (585) 226-9787.

If a product must be returned for any reason, please contact our Customer Service

Department to obtain a Returned Goods Authorization Number (RGA #) before you ship the

product back. Please write the RGA # clearly on the package near the mailing label.

BLUE

ON

OFF

GOOD

CHASSIS

GROUND

RED

BLACK

WARNING

LIGHT #1

ON

BLACK

2

1

2

1

OFF

SW1

RED

GOOD

CHASSIS

GROUND

CONNECT RED FUSED LEAD TO +12 VDC

RED

BLACK

WARNING

LIGHT #2

GOOD

CHASSIS

GROUND

SW2

3

3

SP3860-2 SWITCH PANEL (REAR VIEW)

15 AMP

FUSE

ONE YEAR LIMITED WARRANTY

The manufacturer warrants each new product, under normal use, against
factory defects in material and workmanship for one year after the date of
purchase. The owner will be responsible for returning to the Service Center
any defective item(s) with the transportation costs prepaid. The manufacturer
will, without charge, repair or replace at its option, products, or part(s), which
its inspection determines to be defective. Repaired or replacement item(s)
will be returned to the purchaser with transportation costs prepaid from the
service point. A copy of the purchaser's receipt must be returned with the
defective item(s) in order to qualify for the warranty coverage.

Exclusions from this warranty include, but are not limited to, bulbs, strobe
tubes, domes, and/or the finish. This warranty shall not apply to any light,
which has been altered, such that in the manufacturer's judgment, the
performance or reliability has been affe cted, or if any damage has resulted
from abnormal use or service. This warranty does not apply to defect or
damage occurring as a result of disaster, accident, abuse, misuse, lightning,
power surges, or failure to follow instructions in any enclosed manuals. Any
damage or defects occurring as a result of any unauthorized service or
repairs by unauthorized persons shall be excluded from this warranty.

There are no warranties expressed or implied (including any warranty of
merchantability or fitness), which extend this warranty period. The loss of use
of the product, loss of time, inconvenience, commercial loss or
consequential damages, including costs of any labor, are not covered.
The
manufacturer reserves the right to change the design of the product without
assuming any obligation to modify any product previously manufactured.

This warranty gives you specific legal rights. You might also have additional
rights which may vary from state to state. Some states do not allow
limitations on how long an im plied warranty lasts. Some states do not allow
the exclusion or limitation of incidental or consequential damages. Therefore,
the above limitation(s) or exclusion(s) may not apply to you.

Advertising