Star Headlight & Lantern VL22 StarVisor I - Manual

PLITSTR284 REV. D 3/29/05
The
STARVISION II™ visor light is designed to be mounted on the inside of
your vehicle. It is not intended for exterior applications.
It is the sole responsibility of the owner to ensure the warning light is
secure. Check your light every time you enter the vehicle to ensure that it
is mounted securely. Star Headlight and Lantern Co. assumes no
responsibility for the secure mounting of this light.
MODEL VL22 LED VISOR LIGHT
30 Tilt-Activated Flash Patterns – Lightweight – Polycarbonate
Voltage : 10-16VDC
Current Draw : Approx. 1.5 Amps
STARVISION II
™
IMPORTANT: Please read all of the following instructions before installing your new Model VL22
STARVISION II™ LED Visor Light .
CAUTION: Please be sure to check that your cigarette plug outlet is properly fused. Testing the
light before this fuse is properly installed will void the warranty on the light.
WARNING!!!! Care should be taken when positioning this warning light on the visor so that the light
and/or cord does not interfere with the proper operation of the driver-side or passenger- side
airbag! Failure to heed this warning may result in serious or fatal injury.
The VL22 uses state-of-the-art Light Emitting Diode (LED) technology. This
warning light is comprised of ultra-high intensity LEDs that are operated by a micro-
controller to efficiently produce light output with lifetimes up to 100,000 hours.