TracRac IM TracRac Toolbox Mount Kit - Manual

994 Jefferson Street, Fall River, MA 02721
Tel: 800-501-1587, 508-677-4130, Fax: 508-677-4136
(REV B) 06/11/02 Page 1 of 4
T OOL B OX M OUNT I NSTALLATION SKU# 25200
The ToolBox Mount Kit is designed to allow you to integrate your toolbox to the TracRac Base Rails:
Ø Mount your toolbox without drilling, bolting or damaging your truck.
Ø Slide your toolbox back to the tailgate for easy access.
Ø Painlessly remove your toolbox from the truck, for greater cargo carrying capacity.
Note: We design the TracRac system to accommodate most style toolboxes. Check to confirm that the belly of the
box fits between the baserails (on most trucks, the width of the belly needs to be 61” or less.)
1) Verify that you have received the correct parts, using the attached Assembly Drawing and Packing Checklist.
2) Replace the knobs in the forward racks with the ½” x ½” Set Screws w/ Nylon Tip supplied with ToolBox
Mount assembly. (This allows the toolbox to fit directly behind the overhead racks!)
Tools Required
1) Tape Measure
2) Power Drill
3) 1/8” Drill Bit
4) 1/2” Drill Bit
5) Socket Wrench
6) 9/16” Socket
7) 3/16” Allen Wrench
8) 1/4” Allen Wrench
9) Felt Tip Marker
Recommended
1) Torque Wrench