Linksys WRT54GS - Manual (Page 11)

Chapter3
Advanced Configuration
 Wreless-G Broadband Router wth SpeedBooster
DynDNS.org
Setup > DDNS > DynDNS
User Name Enter the User Name for your DDNS account.
Password Enter the Password for your DDNS account.
Host Name The is the DDNS URL assigned by the DDNS
service.
Internet IP Address The Router’s Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed here.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
TZO.com
Setup > DDNS > TZO
E-mal Address, TZO Key, and Doman Name Enter the
settings of the account you set up with TZO.
Internet IP Address The Router’s Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed here.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification. Some ISPs will require
you to register a MAC address in order to access the
Internet. If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature.
Setup > MAC Address Clone
MAC Address Clone
Enable/Dsable To have the MAC Address cloned, select
Enable.
User Defned Entry Enter the MAC Address registered
with your ISP here.
Clone Your PC’s MAC Address Clicking this button will
clone the MAC address of the computer you are using.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
Setup > Advanced Routing
This screen is used to set up the Router’s advanced
functions. Operating Mode allows you to select the
type(s) of advanced functions you use. Dynamic Routing
automatically adjusts how packets travel on your network.
Static Routing sets up a fixed route to another network
destination.
Setup > Advanced Routing (Gateway)